Skip to main content
Go to search page
Published: 13 May 2022

The Murray–Darling Basin Authority is increasing releases from Hume Dam today.  

MDBA acting Executive Director of River Management, Dr Andrew Kremor said releases would increase from 600 megalitres per day because storage levels were high, demand had dropped, and we were heading into the period of peak inflows.

"We are aiming to provide a buffer against large rain events and reduce the risk of flooding over winter," Dr Kremor said.

The decision to release water now, with the dam 88 percent full, is in line with the rules set by Basin governments for dam management. The MDBA cannot make releases to create additional airspace unless there's a very high chance the dam will fill before demand exceeds inflows.

"These decisions are based on long-term average inflows and a worst-case scenario that conditions will turn dry, which at this stage appears unlikely.

"We expect the releases we make now will have no impact on the security of water supply from the Hume Dam down the track.

"Rain falling in the Upper Murray this week means there is a chance that we will increase releases further, depending on how much water flows into the dam. Catchments have dried out over autumn so it would take heavy rain or back-to-back events to wet them up again.

"Overbank flows in the Murray River downstream of Hume Dam require flows of 25,000 megalitres per day, and though we are still a long way from seeing that volume of water in the river, conditions can change quickly.

"We advise people living near the river to keep up to date with the latest weather information including warnings, river conditions and rainfall in your area through the Bureau of Meteorology."

For more information about how the MDBA manages dams to reduce the impact of flooding visit: How are dams being managed to reduce the impact of flooding?


Share this page

Subscribe for regular updates